Artwork guide
Print-ready artwork, without the jargon.
Whether you work in Illustrator, Photoshop, Procreate, Canva or something else, these tips will help your design come out looking as good as it does on screen. You don’t need to be a print expert, and our preview catches the most common problems before you order.
Step 1
Set up your file
Getting the size, resolution and colour right at the start saves you redoing it later.
Design at print size (or bigger)
Create your document at the size you want it printed, or larger. Scaling a small image up is what makes prints look blurry, while scaling a big one down is fine.
Use 300 DPI
Screens get away with around 72 pixels per inch, but print needs far more. Aim for 300 DPI at your finished size: a 75mm sticker needs about 900 × 900 pixels. Going higher than 300 won’t make it any sharper. Our preview works out the DPI of your upload at the size you pick and warns you if it drops below 150, which is where prints start to look soft.
Work in CMYK if you can
Printers mix colour from cyan, magenta, yellow and black ink, so a CMYK document gives you the closest idea of the final result. RGB files are fine to upload and we convert them for you, but very bright or neon colours can come out a touch duller in print. Setting CMYK when you create the file means no surprises.
Step 2
Custom shapes and cut lines
For a die-cut shape, a transparent background is all you need. We handle the cut line.
Square, rectangle, rounded and circle stickers are cut to that shape, so there’s nothing to do. For a custom shape, upload your design on a transparent background (a PNG or SVG works best). We follow the outline of your artwork and add a small border around it. You don’t need to draw a cut line yourself.
A white or coloured background counts as part of your design, so a JPEG or a flattened image will just be cut as a rectangle. Our preview flags this if it spots it.
For the cleanest cut:
- Keep the outline fairly smooth. Big curves cut better than lots of spiky points.
- Join floating pieces together, such as separate letters, with a shape or outline behind them, or they’ll be cut as one blob or bridged together.
- Avoid thin slivers and tiny gaps, as they’re hard to cut and easy to tear when peeling.
- Remove stray pixels and soft drop shadows around the edge. Anything that isn’t fully transparent gets included in the shape.
Tip
Step 3
Bleed and safe zone
Cutting can move by up to about 1mm, so give yourself some room on both sides of the edge.
If your design has a background colour or image that runs right to the edge, extend it at least 2mm past where it will be cut. This is called bleed. Without it, a tiny shift when cutting can leave a thin white sliver along one side.
Keep text, logos and anything important at least 3mm inside the edge. That’s your safe zone, and it stops anything getting trimmed off.
Bleed applies to posters and framed prints too. We print your file exactly as you send it, so crop it to the size you’re ordering before you upload.
Step 4
Border or no border?
There’s no right answer here. It comes down to the design and the look you’re going for.
A white or coloured border makes a design look like it’s floating, makes the cut more forgiving and suits illustrations, characters and lettering. If you want one, add it to your artwork. There’s no need for bleed, as the border is the edge.
Cutting to the edge suits full-colour designs, photos and badges, where the artwork itself is the shape. Make sure you’ve added bleed so the colour goes right to the edge.
Step 5
White, clear and metallic materials
How white and transparent areas print depends on the material you choose.
- White vinyl, paper and film: there’s no white ink. Anything white in your design is left unprinted and shows the white material underneath.
- Clear vinyl, window and cling: we print white ink under your design so it stays bold on glass and coloured surfaces. Transparent areas stay see-through.
- Metallic, holographic and sparkly: white ink goes under your design to keep colours solid. Transparent areas show off the shiny finish.
So on clear and metallic stickers, leave areas transparent if you want them to show the material, and use white where you want solid white. Our materials guide has the detail for each finish.
Step 6
Text, lines and fonts
Small details can disappear in print, and fonts can swap out if they aren’t embedded.
- Keep all text at 4pt or above. 6pt or more is easier to read, especially with thin or light fonts.
- Avoid hairline strokes, as very thin lines can break up or disappear in print.
- In Illustrator or similar, convert text to outlines (Type › Create Outlines) before exporting a PDF, AI, EPS or SVG, so the font can’t be swapped for a default one.
- Outline your strokes too (Object › Path › Outline Stroke) so their thickness can’t change when the file is scaled.
- Spell-check everything. We print exactly what you upload.
Step 7
Which file format?
We accept PNG, JPEG, WEBP, SVG, EPS, PDF and AI files up to 100MB.
| Format | Best for |
|---|---|
| SVG, PDF, AI, EPS | Vector logos, illustrations and text. They stay sharp at any size. Outline your fonts first. |
| PNG | Pixel artwork and custom shapes. It keeps transparent backgrounds, so we can cut around your design. |
| JPEG | Photos on square, rectangle and circle stickers, posters and prints. No transparency, so it can’t be used for a custom shape. |
| WEBP | Works like PNG or JPEG, but export a PNG if you’re unsure whether your WEBP has a transparent background. |
Step 8
Check your preview
The preview is your proof, so give it a proper look before you pay.
Once you upload, the preview shows your design at its real size, in your chosen shape and material, with the cut line drawn on. Check the spelling, how close things sit to the edge and whether you’ve had a low resolution warning. Section 4 of our Terms explains what to look for, and which small colour and cutting differences are normal.
Before you upload, make sure you have the right to print everything in your design. Our Artwork & Ownership policy covers what we can and can’t print.
Artwork questions
What file formats do you accept?
PNG, JPEG, JPG, WEBP, SVG, EPS, PDF and AI.
A CMYK PDF with bleed and crop marks is preferred. For a custom-shaped sticker, use a PNG or SVG with a transparent background so we can cut around your design.
Your file goes to print exactly as you send it. We don’t check or change it, so make sure it’s set up at the size you’re ordering.
What resolution should my artwork be?
Aim for 300dpi at the finished size. For example, a 75mm sticker needs roughly 900 × 900 pixels. Our preview checks your file at the size you choose and warns you if it drops below 150dpi, which is where prints start to look soft.
What’s the difference between a bitmap and a vector file?
A bitmap (or raster) image is made of pixels. Photos, PNGs and JPEGs are bitmaps, and they lose quality if they’re scaled up too far.
A vector file is built from mathematical shapes, so it can be scaled to any size without losing quality. AI and SVG files are vectors, and EPS and PDF files can contain vectors too. Logos and text look sharpest supplied as vectors.
Should my artwork be in CMYK or RGB?
CMYK if you can. Printers mix colour from cyan, magenta, yellow and black ink, so a CMYK file gives you the closest idea of the final result.
RGB files are fine to upload and we convert them for you, but some very bright or neon colours that screens can show aren’t printable, so they may come out slightly duller.
Do you match Pantone colours?
We’ll get as close as we can to any Pantone colours in your artwork. Some Pantone shades can’t be reproduced in CMYK digital print, so the closest possible shade is printed.
How much bleed should I add?
If your background runs right to the edge, extend it at least 2mm past the cut line. Cutting can move by up to about 1mm, and bleed stops a thin white sliver appearing along one side.
Keep text, logos and anything important at least 3mm inside the edge. The artwork guide has diagrams.
What is the minimum text size?
We recommend 4pt or larger for all text. Very fine lines and small text can fill in or break up, especially on textured or metallic materials.
Is there a maximum file size?
Each artwork file can be up to 100MB. If yours is bigger, try exporting a flattened PDF or PNG at 300dpi for the finished size, or contact us and we’ll help.
Will you send me a proof?
Your preview is your proof. The live preview shows your artwork, shape and finished size, and when you place your order you’re approving it. We don’t send a separate proof by email, so your order goes to print as soon as it’s confirmed.
Please check spelling, phone numbers, dates and anything near the cut line before you pay. We print your artwork as supplied and don’t proofread or redraw it. See Your preview is your proof in our terms.
Do you offer templates?
You can order almost any size within our minimum and maximum limits, so there are no fixed templates. Set your document up at the size you want printed, then follow the artwork guide.
How long do you keep my artwork?
- Uploads that never become an order are deleted after 3 days.
- Designs you save for later are kept for 30 days.
- Artwork from an order is kept for 90 days after it’s dispatched, so we can handle reprints.
Always keep your own copy. More detail is in our artwork policy.
Is there anything you won’t print?
You need the right to print everything in your design, and we won’t print anything illegal, hateful or that infringes someone else’s trademark or copyright. Our artwork policy sets out exactly what’s allowed.
Who owns your artwork, what we can print and how long we keep your files: Artwork & Ownership.
Still unsure?
Send us your file and tell us what you’re making. We’ll let you know if it’s ready to print, or what needs changing.